Wright’S Septic Tank Pumping Service

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best that it be checked by a professional contractor every year.

There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Most American adults use between 80 and 100 gallons of water a day. This amounts to roughly 90 gallons per year of solid waste. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can help you identify any potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult to calculate the cost of septic tank cleaning. Three local companies are the best way to estimate the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.