Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many things you could do to keep your tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running the faucet while brushing your teeth or washing your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. The tank will need to be pumped when the sludge has reached the bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. A septic tank should be capable of reducing solids by 50 percent.
The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks need very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.
Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. A septic inspection can be done once or several times during a property purchase. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are expensive but necessary.