What Is Pumping A Septic Tank

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to get it checked by a professional contractor at least once a year.

There are many things you could do to keep your tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water by not running the faucet while brushing your teeth or washing your dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This amounts to roughly 90 gallons per year of solid waste. A septic tank’s standard performance is 50 percent less solids.

The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will inspect your tank after pumping it. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. Before you can get it in place, you might have to wait until all the construction is done.

It can be hard to determine how much a septic tank cleaning should cost. Three local companies are the best way to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.