What Happens To Pump Out Septic Tank System

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best that it be checked by a professional contractor every year.

There are many things you can do to keep your septic tank clean. First, you should not use more water than you usually do. The more water in the tank, the more difficult it is for waste to break down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. A pump is required to remove the sludge from the tank’s bottom.

You should have a septic tank to handle the water you use, depending on the size of the home. American adults consume between 80 to 100 gallons of drinking water each day. This is equivalent to 90 gallons worth of solid waste per year. The standard performance of a toilet is 50 percent of solids.

The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks don’t require much maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections will alert you to any potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends you pump your tank once every three-five years. However, your specific situation may require a more frequent pumping than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be hard to determine how much a septic tank cleaning should cost. Three local companies are the best way to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.