Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. A septic tank should be capable of reducing solids by 50 percent.
The function of your septic tank won’t be improved by adding chemicals. They can actually do more harm than good. For example, sodium hydroxide could cause more harm than good.
Septic tanks are very easy to maintain. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, it is best that you get it checked as soon as possible if there is a problem.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends pumping your tank once every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. You may need to wait until the construction is complete before you can install it.
It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision based on guesswork. Although they are necessary, they are also very expensive.