Tucson Septic Tank Pumping

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to have it checked by a professional contractor at the very least once a month.

There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. The tank will need to be pumped when the sludge has reached the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tanks will not improve its functionality. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.

Septic tanks need very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. If you do notice a problem, it’s best to have it checked right away.

Septic companies will inspect your tank after pumping it. These inspections can help you identify any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. Your specific situation may require more frequent pumping. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are necessary but expensive.