Test Septic Tank Sump Pump

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many things you can do to keep your septic tank clean. The first thing you should do is to use less water than usual. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Most American adults use between 80 and 100 gallons of water a day. This amounts to roughly 90 gallons per year of solid waste. A septic tank should be capable of reducing solids by 50 percent.

The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks don’t require much maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. If you do notice a problem, it’s best to have it checked right away.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. The companies should be able provide a written breakdown of costs. This way you won’t have make guesswork about the cost of your project. Septic tanks are necessary but expensive.