Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best for it to be checked by a professional contractor once a year.
There are many things that you can do to help keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running the faucet while brushing your teeth or washing your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
You should have a septic tank to handle the water you use, depending on the size of the home. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends you pump your tank once every three-five years. However, your specific situation may require a more frequent pumping than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could slow down the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. You may need to wait until the construction is complete before you can install it.
It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This way you won’t have make guesswork about the cost of your project. Septic tanks are necessary but expensive.