Spokane Septic Tank Pumping

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best that it be checked by a professional contractor every year.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water usage by using water-efficient toilets. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tank will not improve its function. They can actually do more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.

Septic companies will inspect your tank after pumping it. These inspections will alert you to any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections are typically included in the repair costs and cost between $100 and $300.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to calculate the cost of septic tank cleaning. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.