Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.
There are many things you can do to keep your septic tank clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.
A chemical additive in your septic tank will not improve its function. They can actually do more harm than good. For example, sodium hydroxide could cause more harm than good.
Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can identify potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that your tank be pumped every three to five years. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. You may need to wait until the construction is complete before you can install it.
It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.