It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.
There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This amounts to roughly 90 gallons per year of solid waste. A septic tank should be capable of reducing solids by 50 percent.
The function of your septic tank won’t be improved by adding chemicals. They can actually do more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks need very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Most septic tanks do not require pumping unless there are significant amounts of sludge. If you do notice a problem, it’s best to have it checked right away.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can help you identify any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be allowed to drive over the tank while they’re building the house. This could cause delays in the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.