Service For Pumping Septic Tank

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.

There are many things that you can do to help keep your septic tank clean. The first thing you should do is to use less water than usual. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tanks will not improve its functionality. They can actually do more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Most septic tanks require very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, if you notice a problem, it is best to get it checked immediately.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections will alert you to any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that your tank be pumped every three to five years. Your situation may require you to pump your tank more frequently than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could slow down the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. You may need to wait until the construction is complete before you can install it.

It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. Three companies should be able give you a written breakdown of the cost. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are essential, they can be costly.