Septic Tank Pumping West Chester Pa

A well-maintained septic tank can reduce the need to make costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best for it to be checked by a professional contractor once a year.

There are many things you could do to keep your tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank, the more difficult it is for waste to break down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.

A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will inspect your tank after pumping it. These inspections can alert you to any problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that you pump your tank every three to five year. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way you won’t have make guesswork about the cost of your project. Although they are essential, they can be costly.