A well-maintained septic tank can reduce the need to make costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.
There are many things you can do to keep your septic tank clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.
A chemical additive in your septic tanks will not improve its functionality. In fact, they could cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could slow down the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.