Septic Tank Pumping Washington Il

It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best for it to be checked by a professional contractor once a year.

There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This is equivalent to 90 gallons worth of solid waste per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

A chemical additive in your septic tank will not improve its function. In fact, they could cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.

Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, it is best that you get it checked as soon as possible if there is a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends pumping your tank once every three to five years. Your situation may require you to pump your tank more frequently than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision based on guesswork. Although they are essential, they can be costly.