Septic Tank Pumping Tri-Cities Washington

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best for it to be checked by a professional contractor once a year.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. Your situation may require you to pump your tank more frequently than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. You may need to wait until the construction is complete before you can install it.

It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are necessary but expensive.