Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.
There are many things you can do to keep your septic tank clean. You should use less water than you normally do. The more water in the tank, the more difficult it is for waste to break down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running the faucet while brushing your teeth or washing your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. The tank will need to be pumped when the sludge has reached the bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Americans consume between 80 and 100 gallons per day. This is equivalent to 90 gallons worth of solid waste per year. The standard performance of a toilet is 50 percent of solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Most septic tanks require very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. If you do notice a problem, it’s best to have it checked right away.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends you pump your tank once every three-five years. Your specific situation may require more frequent pumping. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are expensive but necessary.