Septic Tank Pumping Tifton Ga

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in the tank, the more difficult it is for waste to break down. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

The function of your septic tank won’t be improved by adding chemicals. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections will alert you to any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that you pump your tank every three to five year. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.

It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. You should receive a detailed cost breakdown from the companies. This way you won’t have make guesswork about the cost of your project. Although they are essential, they can be costly.