It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many things you can do to keep your septic tank clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.
You should have a septic tank to handle the water you use, depending on the size of the home. Americans consume between 80 and 100 gallons per day. This amounts to roughly 90 gallons per year of solid waste. A septic tank should be capable of reducing solids by 50 percent.
The function of your septic tank won’t be improved by adding chemicals. They can actually do more harm than good. For example, sodium hydroxide could cause more harm than good.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends you pump your tank once every three-five years. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.