It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to get it checked by a professional contractor at least once a year.
There are many things that you can do to help keep your septic tank clean. The first thing you should do is to use less water than usual. The more water in the tank, the more difficult it is for waste to break down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.
You should have a septic tank to handle the water you use, depending on the size of the home. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks are very easy to maintain. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, if you notice a problem, it is best to get it checked immediately.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can help you identify any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends you pump your tank once every three-five years. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could slow down the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision based on guesswork. Although they are essential, they can be costly.