Septic Tank Pumping South Shore

A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many things that you can do to help keep your septic tank clean. The first thing you should do is to use less water than usual. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.

Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, it is best that you get it checked as soon as possible if there is a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that your tank be pumped every three to five years. Your specific situation may require more frequent pumping. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.

It can be difficult to calculate the cost of septic tank cleaning. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This way you won’t have make guesswork about the cost of your project. Although they are necessary, they are also very expensive.