Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.
There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. The tank will need to be pumped when the sludge has reached the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example, sodium hydroxide could cause more harm than good.
Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, it is best that you get it checked as soon as possible if there is a problem.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can identify potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that you pump your tank every three to five year. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be allowed to drive over the tank while they’re building the house. This could slow down the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. Calling three local companies is the best way of estimating the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.