Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.
There are many things you could do to keep your tank clean. One of the first things you should do is use less water than you typically would. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.
The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks are very easy to maintain. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can alert you to any problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
Before you start building a house, it is a good idea to install a septic tank. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way you won’t have make guesswork about the cost of your project. Although they are necessary, they are also very expensive.