Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best to get it checked by a professional contractor at least once a year.
There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in the tank, the more difficult it is for waste to break down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
You should have a septic tank to handle the water you use, depending on the size of the home. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, if you notice a problem, it is best to get it checked immediately.
Septic companies will inspect your tank after pumping it. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends you pump your tank once every three-five years. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could slow down the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. You may need to wait until the construction is complete before you can install it.
It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are essential, they can be costly.