Septic Tank Pumping Olympia Wa

It is possible to reduce the cost of costly repairs by keeping your septic tank clean. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

The function of your septic tank won’t be improved by adding chemicals. In fact, they can cause more harm that good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks don’t require much maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will not only pump your septic tank but also inspect it. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends pumping your tank once every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.