Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many things you can do to keep your septic tank clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Americans consume between 80 and 100 gallons per day. This amounts to roughly 90 gallons per year of solid waste. The standard performance of a toilet is 50 percent of solids.
A chemical additive in your septic tanks will not improve its functionality. In fact, they could cause more harm than good. For example, sodium hydroxide could cause more harm than good.
Septic tanks don’t require much maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, it is best that you get it checked as soon as possible if there is a problem.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections will alert you to any potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
Before you start building a house, it is a good idea to install a septic tank. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. You may need to wait until the construction is complete before you can install it.
It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.