Septic Tank Pumping Memphis Tn

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.

There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in the tank, the more difficult it is for waste to break down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running the faucet while brushing your teeth or washing your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, if you notice a problem, it is best to get it checked immediately.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends pumping your tank once every three to five years. However, your specific situation may require a more frequent pumping than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.