Septic Tank Pumping Maximum Distance

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.

There are many ways you can help your septic system stay clean. The first thing you should do is to use less water than usual. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water usage by using water-efficient toilets. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tank will not improve its function. In fact, they could cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.

Septic tanks need very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could delay the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This way you won’t have make guesswork about the cost of your project. Septic tanks are expensive but necessary.