Septic Tank Pumping Massey

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best for it to be checked by a professional contractor once a year.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tank will not improve its function. They could actually cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Septic tanks need very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. If you do notice a problem, it’s best to have it checked right away.

Septic companies will inspect your tank after pumping it. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that your tank be pumped every three to five years. Your situation may require you to pump your tank more frequently than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.

It can be difficult to calculate the cost of septic tank cleaning. Three local companies are the best way to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.