Septic Tank Pumping License

A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best for it to be checked by a professional contractor once a year.

There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. American adults consume between 80 to 100 gallons of drinking water each day. This amounts to roughly 90 gallons per year of solid waste. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, it is best that you get it checked as soon as possible if there is a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can alert you to any problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. You may need to wait until the construction is complete before you can install it.

It can be difficult for you to estimate the cost of a cleaning your septic tank. Three local companies are the best way to estimate the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.