Septic Tank Pumping Lafayette Indiana

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.

There are many things that you can do to help keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This amounts to roughly 90 gallons per year of solid waste. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

A chemical additive in your septic tanks will not improve its functionality. In fact, they can cause more harm that good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks need very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will inspect your tank after pumping it. These inspections can help you identify any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to calculate the cost of septic tank cleaning. Calling three local companies is the best way of estimating the cost. The companies should be able to give you a detailed cost breakdown in writing. This way you won’t have make guesswork about the cost of your project. Although they are necessary, they are also very expensive.