It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.
There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Americans consume between 80 and 100 gallons per day. This equates to roughly 90 gallons of solid trash per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
A chemical additive in your septic tank will not improve its function. They can actually do more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks don’t require much maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, if you notice a problem, it is best to get it checked immediately.
Septic companies will not only pump your septic tank but also inspect it. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that you pump your tank every three to five year. However, depending on your particular situation, you may need to pump more often than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are expensive but necessary.