A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best that it be checked by a professional contractor every year.
There are many things you can do to keep your septic tank clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.
A chemical additive in your septic tank will not improve its function. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.
Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, it is best that you get it checked as soon as possible if there is a problem.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends pumping your tank once every three to five years. Your situation may require you to pump your tank more frequently than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.