Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.
There are many things you can do to keep your septic tank clean. You should use less water than you normally do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. A pump is required to remove the sludge from the tank’s bottom.
You should have a septic tank to handle the water you use, depending on the size of the home. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.
The use of chemical additives in your septic system will not improve its performance. They can actually do more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks need very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, it is best that you get it checked as soon as possible if there is a problem.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t have to drive over the tank site as they build the house. This could slow down the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.