It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best for it to be checked by a professional contractor once a year.
There are many things you can do to keep your septic tank clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Americans consume between 80 and 100 gallons per day. This amounts to roughly 90 gallons per year of solid waste. The standard performance of a toilet is 50 percent of solids.
A chemical additive in your septic tank will not improve its function. In fact, they could cause more harm than good. For example, sodium hydroxide could cause more harm than good.
Septic tanks are very easy to maintain. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that you pump your tank every three to five year. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t be able drive over the tank site while building the house. This could slow down the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This way you won’t have make guesswork about the cost of your project. Septic tanks are necessary but expensive.