Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in the tank, the more difficult it is for waste to break down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank should be capable of reducing solids by 50 percent.
A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Most septic tanks do not require pumping unless there are significant amounts of sludge. If you do notice a problem, it’s best to have it checked right away.
Septic companies will not only pump your septic tank but also inspect it. These inspections can alert you to any problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
Before you start building a house, it is a good idea to install a septic tank. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult to calculate the cost of septic tank cleaning. The best way to estimate the cost is to call three local companies. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are expensive but necessary.