Septic Tank Pumping Excelsior Springs Mo

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many things you could do to keep your tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Septic tanks don’t require much maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. If you do notice a problem, it’s best to have it checked right away.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. Your situation may require you to pump your tank more frequently than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. Three companies should be able give you a written breakdown of the cost. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are essential, they can be costly.