Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.
There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.
The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. American adults consume between 80 to 100 gallons of drinking water each day. This amounts to roughly 90 gallons per year of solid waste. A septic tank should be capable of reducing solids by 50 percent.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, it is best that you get it checked as soon as possible if there is a problem.
Septic companies will inspect your tank after pumping it. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. You may need to wait until the construction is complete before you can install it.
It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.