Septic Tank Pumping Elizabethton Tn

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.

There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. A pump is required to remove the sludge from the tank’s bottom.

You should have a septic tank to handle the water you use, depending on the size of the home. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tank will not improve its function. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks don’t require much maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that you pump your tank every three to five year. Your specific situation may require more frequent pumping. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. The companies should be able provide a written breakdown of costs. This way you won’t have make guesswork about the cost of your project. Septic tanks are expensive but necessary.