Septic Tank Pumping Decatur Indiana

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best to get it checked by a professional contractor at least once a year.

There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water usage by using water-efficient toilets. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

A chemical additive in your septic tanks will not improve its functionality. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.

Septic tanks are very easy to maintain. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Most septic tanks do not require pumping unless there are significant amounts of sludge. It is important to immediately notify your local health department if you suspect a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections will alert you to any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections usually cost $100 to $300 and are rolled into the repair costs.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that you pump your tank every three to five year. Your situation may require you to pump your tank more frequently than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are expensive but necessary.