It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to get it checked by a professional contractor at least once a year.
There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water usage by using water-efficient toilets. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.
The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks are very easy to maintain. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that you pump your tank every three to five year. However, depending on your particular situation, you may need to pump more often than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.