Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.
There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in the tank, the more difficult it is for waste to break down. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This amounts to roughly 90 gallons per year of solid waste. The standard performance of a toilet is 50 percent of solids.
The use of chemical additives in your septic system will not improve its performance. They can actually do more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, it is best that you get it checked as soon as possible if there is a problem.
Septic companies will inspect your tank after pumping it. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.