It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best for it to be checked by a professional contractor once a year.
There are many things that you can do to help keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.
You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks don’t require much maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends you pump your tank once every three-five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.