Septic Tank Pumping Chiefland Fl

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best for it to be checked by a professional contractor once a year.

There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. The average American adult uses between 80-100 gallons of water per day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank should be capable of reducing solids by 50 percent.

A chemical additive in your septic tank will not improve its function. They can actually do more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.

Septic tanks are very easy to maintain. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections can identify potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends pumping your tank once every three to five years. Your situation may require you to pump your tank more frequently than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.