It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water usage by using water-efficient toilets. You can also save water by not running the faucet while brushing your teeth or washing your dishes.
The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. The tank will need to be pumped when the sludge has reached the bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. A septic tank should be capable of reducing solids by 50 percent.
A chemical additive in your septic tank will not improve its function. In fact, they could cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks need very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, if you notice a problem, it is best to get it checked immediately.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic inspection can be done once or several times during a property purchase. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends you pump your tank once every three-five years. However, your specific situation may require a more frequent pumping than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be hard to determine how much a septic tank cleaning should cost. Calling three local companies is the best way of estimating the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.