Septic Tank Pumping Arlington Tx

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.

There are many things that you can do to help keep your septic tank clean. You should use less water than you normally do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This amounts to roughly 90 gallons per year of solid waste. A septic tank’s standard performance is 50 percent less solids.

The function of your septic tank won’t be improved by adding chemicals. They can actually do more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks need very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, it is best that you get it checked as soon as possible if there is a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision based on guesswork. Septic tanks are expensive but necessary.