Septic Tank Pump System

It is possible to reduce the cost of costly repairs by keeping your septic tank clean. Bacteria in the tank are constantly working to break down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to get it checked by a professional contractor at least once a year.

There are many things that you can do to help keep your septic tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This amounts to roughly 90 gallons per year of solid waste. A septic tank should be capable of reducing solids by 50 percent.

A chemical additive in your septic tank will not improve its function. They can actually do more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks don’t require much maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Most septic tanks do not require pumping unless there are significant amounts of sludge. It is important to immediately notify your local health department if you suspect a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can identify potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.