Septic Tank Pump Service Haverhill Ma

A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many things you can do to keep your septic tank clean. The first thing you should do is to use less water than usual. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water usage by using water-efficient toilets. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

You should have a septic tank to handle the water you use, depending on the size of the home. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.

Septic tanks need very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that you pump your tank every three to five year. However, your specific situation may require a more frequent pumping than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.