Septic Tank Pump Outs

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best that it be checked by a professional contractor every year.

There are many things that you can do to help keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. The tank will need to be pumped when the sludge has reached the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks don’t require much maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could slow down the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. You may need to wait until the construction is complete before you can install it.

It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. Three companies should be able give you a written breakdown of the cost. This way you won’t have make guesswork about the cost of your project. Septic tanks are necessary but expensive.