It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank’s bacteria is constantly working to remove solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best that it be checked by a professional contractor every year.
There are many things you could do to keep your tank clean. The first thing you should do is to use less water than usual. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running the faucet while brushing your teeth or washing your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.
The function of your septic tank won’t be improved by adding chemicals. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks don’t require much maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends pumping your tank once every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult to estimate the cost of a septic tank clean. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.